How to make a linksys BEFSR41 a switch by disconnecting its DCHP while staying connected to actiontec router

Toggle sidebar Toggle sidebar
P

parauro

Reputable
Aug 23, 2015
1
0
4,510
Have FIOS into Actiontec MI424WR Rev.1 router. It feeds a wired connection and a few wifi devices. I need to add additional wired upstairs, away from router. I have a wired outlet upstairs, and want to use my old Linksys BEFSR41 as a switch for a few wired devices. How do I connect to the Linksys to turn off the DCHP? I don't want to disturb the Actiontec. Thanks
 
Solution
A
Check the manual, eg here
- Reset the router if you don't know current IP address / password
- Connect only your PC to the router, open a browser at 192.168.1.1
- Configure it as per your likings
- Give it a static IP address from your existing Actiontec network
- You might have to connect your existing cable to Actiontec to the "Uplink" port

Note: Brand-new 10/100/1000 five-port switch will be like $20.
Sort by date Sort by votes
A

Alabalcho

Titan
Jan 13, 2011
14,019
435
76,290
Check the manual, eg here
- Reset the router if you don't know current IP address / password
- Connect only your PC to the router, open a browser at 192.168.1.1
- Configure it as per your likings
- Give it a static IP address from your existing Actiontec network
- You might have to connect your existing cable to Actiontec to the "Uplink" port

Note: Brand-new 10/100/1000 five-port switch will be like $20.
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom