- Oct 27, 2011
- 108
- 0
- 18,690
OCCT errors, Can't make any sense out of the error pictures. Can anyone help me out?? Thanks Flyboy. Sorry.....Ok...
System: Windows 7 64bit
AMD FX-8320e processor
ASRock 970 Extream3 r2.0
32 gigs Ripjaws memory
2 SSD drives (120 with Win 10)( 240 with Win 7)
2 EVGA Video Cards GForce GTX 570's Crossfire
2 other drives 7200 1tb each
1000watt Power supply
OK, start of the problem: first my power supply blew the on-board fuse, it was a 850watt. So I did some research and they recommend 900 or if a lot of gaming 1000watts which I did. I took the 850 apart and that's how I found the blown fuse.
I installed the new power supply (1000watt) and got the system back up.
So, to test it I ran Burn on it and got some weird errors which I don't know how to read, then I ran OCCT 4.41 and got these pics I don't know how to read. Some said memory, some say CPU, some say graphics.
I ran memtest86 on it today for 2 hours with no errors.
I don't overclock, except for X-Boost being enabled. I got some errors too about memory management. So I re-installed windows 7 and 10. I have the pictures that OCCT put out. I build my own systems but don't know much about reading these results as like I said I'm not really an overclocker. All my stuff is still under warranty except I think the motherboard, but I have a 970 2.0
(not the extream) and another Biostar 970 TA board. I mainly got them for their crossfire support, but later found out the second PCIe slot only runs at X4 so it doesn't really help. I wanted it for After FX. I don't do that much gaming and none online. If you need these pictures from OCCT, if you'll tell me how to send them I will. THANK YOU SO MUCH for the reply!! Cliff
https://www.dropbox.com/home/Photos/Sample%20Album
I am uploading the pictures..THANK YOU!!!
System: Windows 7 64bit
AMD FX-8320e processor
ASRock 970 Extream3 r2.0
32 gigs Ripjaws memory
2 SSD drives (120 with Win 10)( 240 with Win 7)
2 EVGA Video Cards GForce GTX 570's Crossfire
2 other drives 7200 1tb each
1000watt Power supply
OK, start of the problem: first my power supply blew the on-board fuse, it was a 850watt. So I did some research and they recommend 900 or if a lot of gaming 1000watts which I did. I took the 850 apart and that's how I found the blown fuse.
I installed the new power supply (1000watt) and got the system back up.
So, to test it I ran Burn on it and got some weird errors which I don't know how to read, then I ran OCCT 4.41 and got these pics I don't know how to read. Some said memory, some say CPU, some say graphics.
I ran memtest86 on it today for 2 hours with no errors.
I don't overclock, except for X-Boost being enabled. I got some errors too about memory management. So I re-installed windows 7 and 10. I have the pictures that OCCT put out. I build my own systems but don't know much about reading these results as like I said I'm not really an overclocker. All my stuff is still under warranty except I think the motherboard, but I have a 970 2.0
(not the extream) and another Biostar 970 TA board. I mainly got them for their crossfire support, but later found out the second PCIe slot only runs at X4 so it doesn't really help. I wanted it for After FX. I don't do that much gaming and none online. If you need these pictures from OCCT, if you'll tell me how to send them I will. THANK YOU SO MUCH for the reply!! Cliff
https://www.dropbox.com/home/Photos/Sample%20Album
I am uploading the pictures..THANK YOU!!!
Facebook
Twitter
Instagram