Ok, so this is the fist computer I've ever built. Here are the specs:
Motherboard: Gigabyte H87 DH3
CPU: Intel i5 4460 3,2hz
RAM: 1x 8GB HYPERX DDH3 1866
PSU: Tacens Mars Gaming 700W
SSD: Kingston 120GB
Not running a GPU
So basically I've run all the steps in the big troubleshooting threads:
Ive put the one stick of RAM in all available slots, triple checked all cables (CPU, 24pin, etc) resetted the CMOS, I also checked the CPU, none of the pins were bad and it was correctly installed.
I have taken out the mobo out of the case, with only the CPU+RAM+ power cables and nothing. The fans turn on for a couple of seconds and turn back off. I don't know what the problem is, if my mobo is fried, the CPU is gone or what. I dont know what the next step would be.
Thanks in advance!
Motherboard: Gigabyte H87 DH3
CPU: Intel i5 4460 3,2hz
RAM: 1x 8GB HYPERX DDH3 1866
PSU: Tacens Mars Gaming 700W
SSD: Kingston 120GB
Not running a GPU
So basically I've run all the steps in the big troubleshooting threads:
Ive put the one stick of RAM in all available slots, triple checked all cables (CPU, 24pin, etc) resetted the CMOS, I also checked the CPU, none of the pins were bad and it was correctly installed.
I have taken out the mobo out of the case, with only the CPU+RAM+ power cables and nothing. The fans turn on for a couple of seconds and turn back off. I don't know what the problem is, if my mobo is fried, the CPU is gone or what. I dont know what the next step would be.
Thanks in advance!
Facebook
Twitter
Instagram