Used CLEAN using Diskpart. How do I recover all DATA. HELP

FelipePorto8

Reputable
Aug 26, 2015
2
0
4,510
Lost DATA after using CLEAN only (not clean all) inside Diskpart on an internal HD (150Gb with data only - photos, music, files... - no OS). It shows on My Computer but it's not accessible. On Disk Management it says "RAW - Healthy (Active, Primary Partition). How can I recover all the DATA easily?! Please help me out... Thanks a lot guys!!!
 
Solution
)Go to Computer Management
2) in the left pane go to storage and select Disk Management
3)There is many disk option select your external or internal or pendrive you want to recover
4)select the partition and right click on and select change drive letter and paths...
Note :- Do not select Mark Partition as active.it will loose your all data inside drives.
5)the change drive letter and paths...will display one window and click add
this will show another on window.
6)assign the following drive letter or path select combo list and assign the drive of your old (example:- your drive names d,e,f)
and click ok
7)now the drive will open and data will not loosed.

FelipePorto8

Reputable
Aug 26, 2015
2
0
4,510


No... I've been running TestDisk for almost 24hs and it is still showing 3% done only...
 

puttynene

Reputable
Oct 29, 2014
99
0
4,660
)Go to Computer Management
2) in the left pane go to storage and select Disk Management
3)There is many disk option select your external or internal or pendrive you want to recover
4)select the partition and right click on and select change drive letter and paths...
Note :- Do not select Mark Partition as active.it will loose your all data inside drives.
5)the change drive letter and paths...will display one window and click add
this will show another on window.
6)assign the following drive letter or path select combo list and assign the drive of your old (example:- your drive names d,e,f)
and click ok
7)now the drive will open and data will not loosed.
 
Solution