syked3 :
unfortunately you only have one sys_fan header on your mobo which means you'll need a PWN fan splitter cable. These usually allow for two fans to connect to one port on your mobo however look around and see if you can find one which supports more fan connections. For the rest of the fans, you'll need a fan to molex adapter. This adapter will allow you to connect numerous fans to the molex leads from you PSU(it looks like your PSU has molex leads but double check). Make sure the molex adapter has multiple ports for multiple fans or make sure you have more than 1 molex lead coming from your PSU. I'd say two intake fans on the front of your case, 2 exhaust fans on top, one side intake and then the fan from the h50 as a rear exhaust.
Here is a great deal on the CobocLP43TX4-12 Sleeved 16 inch 4-pin Molex LP4 toThree(3) x 4-pin TX4 PWM Fan Power Splitter Adapter Converter Cable with one TX4 Female for RPM Feedback ,
http://www.newegg.com/Product/Product.aspx?Item=12-423-164
I found.
Sorry for the poor paste, but that should do it right? I'm not gonna have all the fans immediately