If your talking about this one:
http://www.amazon.com/Enermax-Computer-Acrylic-See-Thru-ECA3280A-BL/dp/B00BKX760S/ref=sr_1_4?ie=UTF8&qid=1441326048&sr=8-4&keywords=enermax+ostrog&pebp=1441326061984&perid=01YR3DXYH45T381NY48R
Then i can tell you minor things about it, since i have this case on my build its a great case overall,great cooling also, but these are the minor things i have with it as well as a person had the same complaint as i did in the reviews ...
Now for the very minor complaints:
1. There's a hole in the tray where you could potentially route your CPU power connector, but it's completely covered up by the motherboard, so it's useless. You may be able to pass the CPU power cable through one of the other holes, but mine was too short to reach that far.
2. The cables for the front fans wouldn't quite reach the back fan connector on my motherboard, so I had to plug one of them with the included Molex adapter. (Some motherboards may have different locations for the fan plugs, so maybe this won't be a problem for everyone.)
3. The bottom has a fan mounting place with a dust screen, and the PSU fan opening has a screen as well. However, they're annoying to remove because you have to tip the computer on its side. I'll try to rig up something that will allow me to mount the screens in a better way, so that I can slide them out from the side or something.
Or if your talking about this case:
http://www.amazon.com/Enermax-Computer-Acrylic-See-Thru-ECA3253-BW/dp/B009IKC3M6/ref=sr_1_1?ie=UTF8&qid=1441326502&sr=8-1&keywords=enermax+ostrog&pebp=1441326505232&perid=1KM0BMVF5VMNBBASR9C4
I used too have this one aswell because i did kind of see the Front Filter was causing some hardware issues & it was a very small type of case so i replaced it with the one which i had already linked at the top
Facebook
Twitter
Instagram