Hi all, first post =)
I am losing my mind over this!
I have GeForce GTX 970 which has 2 monitors hooked to it (HDMI and DVI).
I also have 10 meters long HDMI cable going to my TV and whenever I decide to watch a movie I unplug the HDMI to the monitor and plug the TV's one.
Then I realized I have a built in graphics on the Z87-A with a HDMI output. I was like "O nice I can have family guy on the TV for background while I work on my 2 monitors".
Right?
No!
Googling around I need to enable onboard graphics on my BIOS, but there is NO System Agent Configuration section in there.
Before I take my PC apart what would be my options? Could taking out the 970, booting to bios, enabling onboard, attaching my 970 back again work?
Thank you so much good people of Tom's, saved my behind multiple times over =)
Not sure what info is needed so here's my Speccy Summary
Summary
Operating System
Windows 10 Pro 64-bit
CPU
Intel Core i5 4670K @ 3.40GHz 38 °C
Haswell 22nm Technology
RAM
8,00GB Single-Channel DDR3 @ 799MHz (11-11-11-28)
Motherboard
ASUSTeK COMPUTER INC. Z87-A (SOCKET 1150) 33 °C
Graphics
BenQ EW2440L (1920x1080@60Hz)
LG IPS FULLHD (1920x1080@60Hz)
NVIDIA GeForce GTX 970 (Gigabyte) 46 °C
Storage
238GB M4-CT256M4SSD2 (SSD)
298GB Hitachi HDP725032GLA360 (SATA) 33 °C
149GB INTEL SSDSA1M160G2HP (SSD)
Optical Drives
No optical disk drives detected
Audio
Realtek High Definition Audio
I am losing my mind over this!
I have GeForce GTX 970 which has 2 monitors hooked to it (HDMI and DVI).
I also have 10 meters long HDMI cable going to my TV and whenever I decide to watch a movie I unplug the HDMI to the monitor and plug the TV's one.
Then I realized I have a built in graphics on the Z87-A with a HDMI output. I was like "O nice I can have family guy on the TV for background while I work on my 2 monitors".
Right?
No!
Googling around I need to enable onboard graphics on my BIOS, but there is NO System Agent Configuration section in there.
Before I take my PC apart what would be my options? Could taking out the 970, booting to bios, enabling onboard, attaching my 970 back again work?
Thank you so much good people of Tom's, saved my behind multiple times over =)
Not sure what info is needed so here's my Speccy Summary
Summary
Operating System
Windows 10 Pro 64-bit
CPU
Intel Core i5 4670K @ 3.40GHz 38 °C
Haswell 22nm Technology
RAM
8,00GB Single-Channel DDR3 @ 799MHz (11-11-11-28)
Motherboard
ASUSTeK COMPUTER INC. Z87-A (SOCKET 1150) 33 °C
Graphics
BenQ EW2440L (1920x1080@60Hz)
LG IPS FULLHD (1920x1080@60Hz)
NVIDIA GeForce GTX 970 (Gigabyte) 46 °C
Storage
238GB M4-CT256M4SSD2 (SSD)
298GB Hitachi HDP725032GLA360 (SATA) 33 °C
149GB INTEL SSDSA1M160G2HP (SSD)
Optical Drives
No optical disk drives detected
Audio
Realtek High Definition Audio
Thank you for taking your time to look into this! 
Facebook
Twitter
Instagram