So I'm at my wits end at what could be the problem here.
I left for a short 4 day vacation and come back to my computer (which I properly turned off) to see "BootMgr is missing"
Long story short, I try using a Windows 10 repair in all sorts of different ways, but to no avail. I crack open my computer and see that somehow the SATA cable on my Corsair SSD (the one that runs the OS) is unplugged. So I plug it back in but still get the same problems.
The Corsair SSD does not show up on my BIOS at all. I've tried plugging different power cables and different SATA cables, but no luck. It doesn't show up. The Kingston and Seagate both show up no matter which combinations of cables are used.
I've been trying to use Windows 10 computer repair from a USB to go into C: (the Corsair drive) to repair it, but I get multiple issues.
In command prompt, Bootrec /fixboot and /fixmbr work fine but on one attempt when the cables were plugged in it said "element not found," but for whatever reason it isn't saying that anymore.
/ScanOs comes up with 0 windows installations, as with /rebuildbcd
chkdsk /r or /f comes up saying it cannot run because the volume is in use by another process. It can be run if dismounted first, but all opened handles to this volume would then be invalid. Then it asks if I want to force a dismount on this volume to which I say No each time because I don't want to screw anything up.
On the Windows repair options, Startup Repair says "Startup Repair couldn't repair your PC. Press 'Advanced Options' to try to repair your PC or 'SHut Down' to turn off your PC. Log File: " (There's no log file)
Go Back to Previous Build says there's a problem and they can't take me back to the previous build. Try Resetting your PC.
I can't system restore because there's no Windows Operating System according to it.
And Reset this PC gives me "The drive where Windows is installed is locked. Unlock the drive and try again."
I tried booting a mounted iso file of Partition Wizard Bootable, but when the DVD Drive boots up it says there's no usable media.
I also once got this: "An operating system wasn't found. Try disconnecting any drives that don't contain an operating system." That was one of the last things I got when I was moving around the Boot order without the Windows 10 USB.
Any suggestions or do I just have a bad SSD now? The fact that I can enter into the C: drive on cmd prompt makes me think there's some fix for it.
Update:
I tried going into cmd prompt and using diskpart and list volume (after unplugging both the working SSD and HDD and using their cables for the non-working Corsair SSD in every combination). This is what I got:
http://imgur.com/56vhl7n
It appears that the actual SSD itself isn't being recognized. My guess is the SSD is fried at this point.
I left for a short 4 day vacation and come back to my computer (which I properly turned off) to see "BootMgr is missing"
Long story short, I try using a Windows 10 repair in all sorts of different ways, but to no avail. I crack open my computer and see that somehow the SATA cable on my Corsair SSD (the one that runs the OS) is unplugged. So I plug it back in but still get the same problems.
The Corsair SSD does not show up on my BIOS at all. I've tried plugging different power cables and different SATA cables, but no luck. It doesn't show up. The Kingston and Seagate both show up no matter which combinations of cables are used.
I've been trying to use Windows 10 computer repair from a USB to go into C: (the Corsair drive) to repair it, but I get multiple issues.
In command prompt, Bootrec /fixboot and /fixmbr work fine but on one attempt when the cables were plugged in it said "element not found," but for whatever reason it isn't saying that anymore.
/ScanOs comes up with 0 windows installations, as with /rebuildbcd
chkdsk /r or /f comes up saying it cannot run because the volume is in use by another process. It can be run if dismounted first, but all opened handles to this volume would then be invalid. Then it asks if I want to force a dismount on this volume to which I say No each time because I don't want to screw anything up.
On the Windows repair options, Startup Repair says "Startup Repair couldn't repair your PC. Press 'Advanced Options' to try to repair your PC or 'SHut Down' to turn off your PC. Log File: " (There's no log file)
Go Back to Previous Build says there's a problem and they can't take me back to the previous build. Try Resetting your PC.
I can't system restore because there's no Windows Operating System according to it.
And Reset this PC gives me "The drive where Windows is installed is locked. Unlock the drive and try again."
I tried booting a mounted iso file of Partition Wizard Bootable, but when the DVD Drive boots up it says there's no usable media.
I also once got this: "An operating system wasn't found. Try disconnecting any drives that don't contain an operating system." That was one of the last things I got when I was moving around the Boot order without the Windows 10 USB.
Any suggestions or do I just have a bad SSD now? The fact that I can enter into the C: drive on cmd prompt makes me think there's some fix for it.
Update:
I tried going into cmd prompt and using diskpart and list volume (after unplugging both the working SSD and HDD and using their cables for the non-working Corsair SSD in every combination). This is what I got:
http://imgur.com/56vhl7n
It appears that the actual SSD itself isn't being recognized. My guess is the SSD is fried at this point.