This happened the first time and I replaced the PSU, I received the replacement today and the computer still makes no signs of turning on. I've tried using a screwdriver instead of the front panel. All cables are securely in and all the headers are screwed in. I'm not sure what to do at this point..
PC won't turn on first time. No signs of power
- Thread starter Connor_2
- Start date
Solution
alexoiu
Titan
- Nov 1, 2012
- 39,818
- 249
- 126,990
Try testing the power supply: https://www.youtube.com/watch?v=5FWXgQSokF4
If a connected fan does spin, try testing the board outside the case, only CPU and CPU fan, both 24 and 8 pin power cables connected. See if the CPU fan does spin when starting the board.
If a connected fan does spin, try testing the board outside the case, only CPU and CPU fan, both 24 and 8 pin power cables connected. See if the CPU fan does spin when starting the board.
alexoiu
Titan
- Nov 1, 2012
- 39,818
- 249
- 126,990
One more test before deciding: disconnect the 8 pin power cable (leave only the 24 pin one), connect a case fan to the board and start it by touching with a screwdriver the 2 pins. Check the board's manual to make sure that you'll short the right pins.
TRENDING THREADS
-
Question User RX 580 8gb red devil powercolor, asking original BIOS- Started by PizzaInGame
- Replies: 5
-
-
-
News Microsoft updates Windows 11 24H2 requirements, CPU must support SSE4.2 or the OS will not boot- Started by Admin
- Replies: 16
Facebook
Twitter
Instagram