I've been having some problems with BSOD's lately (BCCode 116) and had been told to do a stresstest of my GPU(GTX 760) with Furmark, which caused BSOD immediately. I then tried swapping out my GPU with my brothers GPU(GT 730), and the test ran for 10-ish seconds, then my computer shut down, and now it wont start up again.
I tried removing the GPU to see if that would help, but no. When I press the powerbutton nothing happens at all. I had a similar problem before, that my PC wouldn't boot, but back then when i pressed the powerbutton the fan on the PSU would move ever so slightly. Now nothing happens.
I've searched a bit on the internett and found that people say to disconncet all periferals, and try to boot with just mobo, psu and CPU. That didnt work. I decided to try with my brothers PSU. When I press the powerbutton, the LED at the front of the case lights up briefly, the fans rotate 1/4 of a full spin, and the it shuts down.
Does this indicate that both PSU and the mobo is defect?
I tried removing the GPU to see if that would help, but no. When I press the powerbutton nothing happens at all. I had a similar problem before, that my PC wouldn't boot, but back then when i pressed the powerbutton the fan on the PSU would move ever so slightly. Now nothing happens.
I've searched a bit on the internett and found that people say to disconncet all periferals, and try to boot with just mobo, psu and CPU. That didnt work. I decided to try with my brothers PSU. When I press the powerbutton, the LED at the front of the case lights up briefly, the fans rotate 1/4 of a full spin, and the it shuts down.
Does this indicate that both PSU and the mobo is defect?
Facebook
Twitter
Instagram