- Sep 4, 2015
- 2
- 0
- 4,510
Hello, I am getting close to finishing up my custom PC case. I bought an old vintage suit case and from there took on the task of making into the new home for my computer. There is like a nylon rope weave covering the wood on the outside of the case and when i took a hole saw to it, it frayed. not too badly but its not as desirable as i would like. Anyways i was wondering if any one could recommend a material that i could use to cover up the frayed edges on the holes for the fans and side panel window. I was looking for something similar to a rubber u channel like Paul used in his custom side window for the Arctic panther, but the wood is 3/8 inches thick. I'd need like an L channel but cant find anything like that. Anyways, thank you and nay help would be much appreciated.
Here is a link to the picture of the problem area:
http://i61.tinypic.com/2evc02r.jpg
The mobo in it right now is just there for test fitting and wont be in the final product
Thanks for any help!
Here is a link to the picture of the problem area:
http://i61.tinypic.com/2evc02r.jpg
The mobo in it right now is just there for test fitting and wont be in the final product
Thanks for any help!
Facebook
Twitter
Instagram