About a week ago when i start my PC before the Windows 7 load there pop up file researching. After that Windows starts normaly,I waited to everything on desktop load. Then I heard that hard drive stop spinning and after 1sec continue,it sounds like hard drive just started working. Then PC freeze on 1 min,after that time I can do all normally but it happens again after couple minutes. Today i tried to install new Windows but I can't because when Windows is installing it crash because hard drive stops and again start. My hard drive is Baracuda 1TB it's not old hard drive, I'm using it about 6 month already. Any help is good,thank you.
-
T-Mobile Home Internet: Revisiting 5G connectivity for the home after two years
-
Multi-million dollar Cheyenne supercomputer auction ends with $480,085 bid — buyer walked away with 8,064 Intel Xeon Broadwell CPUs, 313TB DDR4-2400 ECC RAM, and some water leaks
Problem with hard drive / Pc crashing and freezing
- Thread starter markor33
- Start date
Solution
C12Friedman
Glorious
- Jan 25, 2012
- 8,966
- 1
- 46,965
Although not real common, hard drives do fail early and it seems yours has done that. I'll suggest contacting Seagate about RMA.
D_Know_WD
Judicious
- Jul 30, 2014
- 6,633
- 3
- 35,960
Hi there markor33,
I would also say that the HDD has most probably failed. Also, as you have tried to reinstall OS, I assume that you don't need the data stored on the drive.
Apart from that, I guess you can try attaching the drive with different cables(both SATA and power ones) to a different SATA port. Then, you can try to reinstall OS again and see whether the issue persists. If it does, you can download some HDD testing tool for DOS mode and see what is wrong with it. Most of the HDD manufacturers have their own testing tools.
If the HDD fails the test, then you will need to contact the place you got it from and eventually RMA it.
Cheers,
D_Know_WD
I would also say that the HDD has most probably failed. Also, as you have tried to reinstall OS, I assume that you don't need the data stored on the drive.
Apart from that, I guess you can try attaching the drive with different cables(both SATA and power ones) to a different SATA port. Then, you can try to reinstall OS again and see whether the issue persists. If it does, you can download some HDD testing tool for DOS mode and see what is wrong with it. Most of the HDD manufacturers have their own testing tools.
If the HDD fails the test, then you will need to contact the place you got it from and eventually RMA it.
Cheers,
D_Know_WD
TRENDING THREADS
-
-
News Apple debuts M4 processor in new iPad Pros with 38 TOPS on neural engine- Started by Admin
- Replies: 76
-
News Firefox user loses 7,470 opened tabs saved over two years after they can’t restore browsing session
- Started by Admin
- Replies: 58
-
News Intel issues official statement on Core K-series crashes: stick to Intel's official power profiles
- Started by Admin
- Replies: 29
-
Question Sapphire RX 5700 XT Nitro+ is not working in main PCIe slot ?
- Started by digows
- Replies: 25
Latest posts
-
Question New 8TB HDD - - - "I/O device error" when trying to initialize it ?- Latest: Phillip Corcoran
-
-
Facebook
Twitter
Instagram