- Sep 27, 2012
- 29
- 0
- 10,530
mobo:Intel-BLKDZ68BC-DZ68BC-LGA1155-ATX-DDR3
windows 7 64 bit
has a cool little button on the back that lights up red and boots you into BIOS
hardware boot kinda, love that!
almost got it now...
any help much appreciated I'm so close with this build now finally
installed
marvell 91.xx sata 6G or did i? the next button never enabled
.
the bios IS seeing the sata drive...
it won't let me format it yet
messing with the bios bit by bit
could be a setting in here is wrong
Chipset Sata (enable)
Chipset sata mode (AHCI)
SATA PORT 0 (NOT INSTALLED)
SATA PORT 1 (NOT INSTALLED)
SATA PORT 2 (NOT INSTALLED)
SATA PORT 3 (NOT INSTALLED)
SATA PORT 4 (NOT INSTALLED)
SATA PORT 5 (NOT INSTALLED)
SATA port 0 hot plug cabability (Enable or disable doesn't seem to matter either way)
SATA port 1 hot plug cabability(Enable)
SATA port 2 hot plug cabability(Enable)
SATA port 3 hot plug cabability(Enable)
SATA port 4 hot plug cabability(Enable)
SATA port 5 hot plug cabability(Enable)
secondary sata controller
configuration
secondary SAta (ENABLE)
DETECTED sECONDARY sata dEVICE:
so toshiba dt01aca050[/b]
so the drive is there
but when I click on C: and then select FORMAT
it's saying a wire is loose maybe or some bs
(I already know it's seeing the device)
a paradox it appears, but probably not
windows 7 64 bit
has a cool little button on the back that lights up red and boots you into BIOS
hardware boot kinda, love that!
almost got it now...
any help much appreciated I'm so close with this build now finally
installed
marvell 91.xx sata 6G or did i? the next button never enabled
.
the bios IS seeing the sata drive...
it won't let me format it yet
messing with the bios bit by bit
could be a setting in here is wrong
Chipset Sata (enable)
Chipset sata mode (AHCI)
SATA PORT 0 (NOT INSTALLED)
SATA PORT 1 (NOT INSTALLED)
SATA PORT 2 (NOT INSTALLED)
SATA PORT 3 (NOT INSTALLED)
SATA PORT 4 (NOT INSTALLED)
SATA PORT 5 (NOT INSTALLED)
SATA port 0 hot plug cabability (Enable or disable doesn't seem to matter either way)
SATA port 1 hot plug cabability(Enable)
SATA port 2 hot plug cabability(Enable)
SATA port 3 hot plug cabability(Enable)
SATA port 4 hot plug cabability(Enable)
SATA port 5 hot plug cabability(Enable)
secondary sata controller
configuration
secondary SAta (ENABLE)
DETECTED sECONDARY sata dEVICE:
so toshiba dt01aca050[/b]
so the drive is there
but when I click on C: and then select FORMAT
it's saying a wire is loose maybe or some bs
(I already know it's seeing the device)
a paradox it appears, but probably not
Facebook
Twitter
Instagram