Local area connection flashes "Network cable unplugged, enabled, identifiying" on a loop when cable is plugged in

RicRaw

Reputable
Sep 20, 2015
3
0
4,510
Ok guys this the first time iv'e ever posted for an answer anywhere as i can normally find the solution by hunting down similar problems or just playing around with stuff myself. This on the other hand is just too difficult for me to work out.
so i bought a 30m Ethernet cable from ebay (cat5 i believe) i tested when i got it and it worked fine. i ran the cable upstairs to my study from the router (sky) downstairs. tested again on dell inspiron 1545 (the one with said issue) and it worked. later that night i set up teamviewer on my desktop (downstairs) to wake on lan via my dell which is upstairs. when setting this up i used a different ethernet cable so i could be close to desktop while setting up teamviewer. managed to get it all working fine but when i plugged into the 30m upstairs it said network cable unplugged then enabled then identifying and it will do that on a loop. i have tested the 30m with a different laptop (HP) and it works i have also tried to changing the port on the router but still no change. i have tested the dell (problem child) with other Ethernet cables and they work. So i am baffled. Any help would be greatly appreciated.
 

RicRaw

Reputable
Sep 20, 2015
3
0
4,510


sorry i dont know what you mean by switch

i dont believe im using any switch just 1 router and three cables 1 for desktop 1 for nothing and the 30m for upstairs study
 

RicRaw

Reputable
Sep 20, 2015
3
0
4,510


yes solid click. cable and port both appear fine. As i said the 30m works on other computers/devices and the dell laptop will work with every other cable ive tried. they just dont work together although they did when i first tried.
 
It happens, I've seen where a single cable won't work with a single computer likely due to the connections being just a tiny bit off on both of them in the wrong way. Try another cable with that system, if it works, just have to use a different cable or get an add-on network card.