Dell Inspiron 660s Case transfer

Rcavff · Sep 22, 2015

Hello, I recently purchased the low profile Nvidia MSI GTX 750 TI to put in my dell inspiron 660s slim tower to upgrade from the integrated graphics card. When I got it, it turned out to be a little too big to fit into the case. My question is can I swap the components from the dell 660s into any of the mini-itx computer cases I listed. If so, do I need to buy any additional components to do so (i.e. new PSU). Lastly, if there is a recommendation or known solution to my case swap I would appreciate that as well.

Thanks!

Nvidia MSI GTX 750 that am upgrading the case to get room for:
http://www.newegg.com/Product/Product.aspx?Item=N82E16814127836

Possible Upgrade Cases:
http://www.newegg.com/Product/Product.aspx?Item=N82E16811205011
http://www.newegg.com/Product/Product.aspx?Item=N82E16811517029
http://www.newegg.com/Product/Product.aspx?Item=9SIA24G2U47238

Kisianik · Sep 22, 2015

What did not fit? Which part?

Rcavff · Sep 22, 2015

Kisianik :

Rcavff · Sep 22, 2015

The graphics cards fans were about 2cm to large to fit in the pcie slot under the top of the case.

Kisianik · Sep 23, 2015

Rcavff :

So on this picture left part I see video card?

So MSI is too fat? This is what you meant? So in order to fit card must be very thin?

As for cases, any Mini ATX cases will do, just get ready for headache to connecting power button to motherboard due to Dell proprietary connector socket.

When you get a case, post here, and I will see what I can do.

Rcavff · Sep 23, 2015

Kisianik :

Rcavff :

So on this picture left part I see video card?

So MSI is too fat? This is what you meant? So in order to fit card must be very thin?

As for cases, any Mini ATX cases will do, just get ready for headache to connecting power button to motherboard due to Dell proprietary connector socket.

When you get a case, post here, and I will see what I can do.

Rcavff · Sep 23, 2015

Kisianik :

Rcavff :

So on this picture left part I see video card?

So MSI is too fat? This is what you meant? So in order to fit card must be very thin?

As for cases, any Mini ATX cases will do, just get ready for headache to connecting power button to motherboard due to Dell proprietary connector socket.

When you get a case, post here, and I will see what I can do.

Rcavff · Sep 23, 2015

That is exactly it. It is too fat. Ill get back to when I get a case. Thanks!

Kisianik · Sep 30, 2015

Crap, the picture is gone....

but not forever

Search

Dell Inspiron 660s Case transfer

Rcavff

Reputable

Kisianik

Kisianik

Splendid

Rcavff

Reputable

Rcavff

Reputable

Kisianik

Splendid

Rcavff

Reputable

Rcavff

Reputable

Rcavff

Reputable

Kisianik

Splendid

TRENDING THREADS

Latest posts

Moderators online

Share this page