Hi! This is my first forum here, so dunno if it will be in the right place, but yeah... So basically, I'm in the process of building a PC for my dad,
Specs:
i5 4590
B85M-G
No GPU, on board graphics
Cooler master elite 500 PSU
Random case
8GB Kingston Single Channel memory
And my computer's fans work, but the monitor I connect with VGA/HDMI saids no signal. I have checked for standoffs, all placed in the right place, the CPU pins aren't bent, the 24-pin connected is OK, and the RAM is in properly. I was very careful so static, so it is very unlikely that the mobo is down, but the mobo speakers don't ring. I have built a PC before, and the same problem happened, but all I had to do was insert the 24-pin and RAM properly. This time, I have checked that they are both in. I am confident that the VGA/HDMI cables work, and the monitor I am using is used by my dad to just watch TV, and yeah, it sure works. Also, when I plug the fan connector for my case fan in, even the fans don't function. Thanks, and I will appreciate your reply ASAP.
Specs:
i5 4590
B85M-G
No GPU, on board graphics
Cooler master elite 500 PSU
Random case
8GB Kingston Single Channel memory
And my computer's fans work, but the monitor I connect with VGA/HDMI saids no signal. I have checked for standoffs, all placed in the right place, the CPU pins aren't bent, the 24-pin connected is OK, and the RAM is in properly. I was very careful so static, so it is very unlikely that the mobo is down, but the mobo speakers don't ring. I have built a PC before, and the same problem happened, but all I had to do was insert the 24-pin and RAM properly. This time, I have checked that they are both in. I am confident that the VGA/HDMI cables work, and the monitor I am using is used by my dad to just watch TV, and yeah, it sure works. Also, when I plug the fan connector for my case fan in, even the fans don't function. Thanks, and I will appreciate your reply ASAP.