- Aug 27, 2011
- 73
- 0
- 18,640
I've been running this build for a few months now, everything has been working fine. I went to change the fan today (the one I had in it was ridiculously loud) and for some reason it won't send power to the fan. I put the old one back in, it wouldn't send power to that one either. If I spin it with my finger, the BIOS monitor claims to be reading speed from it. However, if I short the two power pins on the plug with a screwdriver or other metal object, it will spark. Help please? Without the chassis fan installed, I idle at 55-60. That's the stress temps when I have the fan in. The pinout is a three pin motherboard plug.
Edit:
Forgot to mention this as well. I have a homemade USB power tester (just an old cut up pre iphone 5 cable) and when I touch the power pins on either fan, they both still work.
Edit:
Forgot to mention this as well. I have a homemade USB power tester (just an old cut up pre iphone 5 cable) and when I touch the power pins on either fan, they both still work.
Facebook
Twitter
Instagram