Tp-link power line and sagemcom router compatibility problems

Toggle sidebar Toggle sidebar
S

Sean_5

Reputable
Oct 4, 2015
1
0
4,510
I recently changed from normal broadband to fibre. I have always successfully used Tp-link 200mps power line adapters. They now don't work. I checked them at a computer shop and they are fine. My Sagemcom router connects fine when linked directly to the computer using a cable, just not through the power line.
Any ideas?
 
Solution
kanewolf
Powerline network adapters are transparent to the network. I would start with all new ethernet cables. Most likely cause is a bad cable. Start with everything close together -- both powerline adapters on a non-surge power strip. That will ensure that your two adapters get the best signal between them.
Sort by date Sort by votes
kanewolf

kanewolf

Titan
Moderator
May 29, 2013
37,318
3,275
156,790
Powerline network adapters are transparent to the network. I would start with all new ethernet cables. Most likely cause is a bad cable. Start with everything close together -- both powerline adapters on a non-surge power strip. That will ensure that your two adapters get the best signal between them.
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom