Will Corsair Vengeance RAM Fit With Cooler Master D92 Hyper Cpu Cooler??

Solution
Sorry about missing that. the cooler's ram clearence is exactly 45 mm.
Using ratios to approximate measurements, the ram height is approximately 51.9 mm.

The cooler will fit only if you mount it with the fans facing the rear of the case and it will make ddr slot a1 unusable unless you use a pull only configuration (by removing the fan closest to the ddr slots).

jbseven

Distinguished
Dec 2, 2011
646
0
19,160
i can't find any clearance specs for either the cooler or the ram.

your best bet would be to contact cooler master for dimensions drawing and corsair for ram height and whether the top part of the ram's heatspreader can be removed.
 

jamies99

Reputable
Oct 6, 2015
34
1
4,535


the dimensions of the cooler is already in the link i provided just that the ram does not provide any dimensions
 

jbseven

Distinguished
Dec 2, 2011
646
0
19,160

Unfortunately that is not what i meant by a dimensions drawing. It would show you exactly how much distance between the bottom of the fins to the cpu or motherboard. Something like this.

CM have it for their hyper 212 evo but not for the D92 for some reason.
 

jamies99

Reputable
Oct 6, 2015
34
1
4,535


yea it provides the dimension drawing you have to scroll all the way down after you visit the link
is this it ? here

 

jbseven

Distinguished
Dec 2, 2011
646
0
19,160
Sorry about missing that. the cooler's ram clearence is exactly 45 mm.
Using ratios to approximate measurements, the ram height is approximately 51.9 mm.

The cooler will fit only if you mount it with the fans facing the rear of the case and it will make ddr slot a1 unusable unless you use a pull only configuration (by removing the fan closest to the ddr slots).

 
Solution

jamies99

Reputable
Oct 6, 2015
34
1
4,535


Thanks i think i will go for the 212x cheaper n unlikely it will block my ram slot