[SOLVED]Randomly getting blue screen on new built Desktop

Fardad_1

Reputable
Sep 22, 2015
15
0
4,520
I Just build anew PC and at random times i get the blue screen. I have windows 7, also i tried the windows 7 memory test and it was clean. i have also tried changing my gpu's slot.

My Pc specification:

Motherboard: Gigabyte Gaming G1
Graphic: Msi 980 ti
Ram: coarsair Ram DDR 4 (2x8 GB)
Hard Drive: SSD samsung M.2
Hrd Drive: WD 1 TB
power supply: coarsair 1000i
processor: skylake i-7 (4Ghz)
CPU Cooler: Cooler master

The blue screen happens when i am in windows, sometimes when im using it some times when im not using it and its just idile

this is the blue screen code:
***Stop: 0x00000124 (0x000000......, 0xFFFFFA80118BC028, 0x000...0BF8000..0,ox000000000000200401
 
Solution
bugcheck 0x124 is a common overclocking related bugcheck.
most often the first parameter= 0 means it was called by the CPU.
(text was omitted in the stop code above)

basically, reset the BIOS to defaults, remove any overclocking, and check your power is good.
if you post a link to the memory dump I might get a better clue as to the cause.
bugcheck 0x124 is a common overclocking related bugcheck.
most often the first parameter= 0 means it was called by the CPU.
(text was omitted in the stop code above)

basically, reset the BIOS to defaults, remove any overclocking, and check your power is good.
if you post a link to the memory dump I might get a better clue as to the cause.
 
Solution

Fardad_1

Reputable
Sep 22, 2015
15
0
4,520
I have not over clocked. i noticed that in bios it was showing that my graphics card was on the first slot, however its actually installed on the second slot, i manually changed that. I also noticed in windows log review that every time my .net fails than i get the blue screen so i manually updated that. So far i have not received any more blue screen.