DDR3 1600 not running in i3 350m

iLoiS

Reputable
Oct 9, 2015
3
0
4,510
Hi there!
I have 2 Hynix HMT451S6BFR8A-PB (2x4GB) and i am trying to use them in a vaio i3 350m. When i use them, the ddr3 are detected in BIOS but windows won't start (it keeps restarting). I tried to flash the ddr3 to run at 1066 with Thaiphoon Burner but the ddr3 won't save the new spd. I see that the memories can run at 1066 at the thaiphoon's report.
Need help! Anyone?
Thank you! :)


Thaiphoon's report

Memory Module
Manufacturer
Hynix
Part Number
HMT451S6BFR8A-PB
Serial Number
3BA1F183
JEDEC DIMM Label
4GB 1Rx8 PC3L-12800S-11-13-B3
Architecture
DDR3 SDRAM SO-DIMM
Speed Grade
DDR3-1600K
Capacity
4096 MB
Organization
512M x 64 (1 rank)
Register Manufacturer
N/A
Register Model
N/A
Manufacturing Date
Week 39, 2014
Manufacturing Location
Ichon, Korea
Revision
N0
DRAM Component
Manufacturer
Hynix
Part Number
H5TC4G83BFR-PB
Package
Standard Monolithic
Die Density
4 Gb
Organization
512M x 8 (64M x 8 x 8 banks)
Clock Frequency
800 MHz (1.250 ns)
Minimum Timing Delays
11-11-11-28-39
Read Latencies Supported
11T, 10T, 9T, 8T, 7T, 6T, 5T
Supply Voltage
1.50 V / 1.35 V
XMP Enthusiast
Not programmed
XMP Extreme
Not programmed
SPD Revision
1.3 / February 2014
XMP Revision
Undefined
Frequency CAS RCD RP RAS RC RFC RRD WR WTR RTP
800 MHz 11 11 11 28 39 208 5 12 6 6
667 MHz 10 9 9 24 33 174 4 10 5 5
667 MHz 9 9 9 24 33 174 4 10 5 5
533 MHz 8 7 7 19 26 139 4 8 4 4
533 MHz 7 7 7 19 26 139 4 8 4 4
400 MHz 6 6 6 14 20 104 3 6 3 3
333 MHz 5 5 5 12 16 87 2 5 3 3
 
First, did you buy the software because the demo doesn't let you save the info.

Second, you are aware that DDR is doubled so the 533 it shows above really is 1066.

Third, did you try getting into safe mode, or reinstalling windows or trying with linux before resorting to actually flashing your RAM chips.
 

iLoiS

Reputable
Oct 9, 2015
3
0
4,510


First - yes i did bought it.
Second - yes i know
Third - i did tried to run in safe mode, it kept restarting... didn't tried to reinstall windows because is windows 10, and it supose to auto detect it... didn't tried linux.
 

iLoiS

Reputable
Oct 9, 2015
3
0
4,510


I know... but i'm trying is to put the ddr3 running at 1066 and not 1600...
 

Mike Zimmerman

Distinguished
Apr 10, 2010
6
0
18,510
Hynix always write-protects SPD EEPROM of its original memory modules from being programmed. Had you read READFIRST.txt file which is in the zip package with Thaiphoon Burner demo application before you bought a license for this software?