MSI Gaming M7 z170a and I7 6700k and Corsair Vengeance lpx ddr4 ram no boot, no display, no bios help urgent

Sean_I_really_need_help · Oct 11, 2015

I am in the middle of a build and i have had post (power on self test) showing all components are working but I have now installed it in to the case and there is no input signal to the monitor and keeps showing the same LED error codes when I boot.

I have tried changing memory dimms as i have 2x8gb dimms and they are supposed to be clocked at 2400mhz but they came in at 2133mhz.

My power supply is a Corsair RM850 and is supplying enough power

The Error codes that are showing are 32,33,34,35,36,37,19,99,55,79,62.

That is pretty much it.

Please reply if you have anything that could help as soon as possible.

Sean

Sleetz · Oct 11, 2015

Try reading through the 'Troubleshooting' section of the manual.

Manual download link: MSI Z170A Manual.

Open the PDF file hit Control+F and type 105 and on the next page is troubleshooting.

Supahos · Oct 11, 2015

All the codes show does it stop on one? That would be the one causing the issue

hapkiman · Oct 11, 2015

I have that same board and same CPU, and Corsair Vengeance LPX 3000MHz DDR4 (2 x 8GB sticks). I have no issues whatsoever. My rig runs great!!! My RAM also shows 2133MHz at default, but as soon as I clicked the red XMP button- all was good and running at 3000MHz. No probs. The Enhanced Turbo feature keeps all fours cores on my i7 6700k running at 4.2GHz as well (but I OC'ed to 4.4 right now). Awesome.... It's a great board. But it's always possible that you got a lemon. Before I gave up and RMA'ed I would:

...First I would reset CMOS. Then update the board's BIOS if you haven't already using M-Flash. Make sure you plug USB stick in to back of motherboard and not into a front panel USB slot. I'm running BIOS v1.6.

Then re-post with results.

hapkiman · Oct 12, 2015

And I assume you already are, but make sure you are populating the 2nd and 4th DIMM slots.

brosiahchill · Apr 18, 2016

hapkiman :

I have that same board and same CPU, and Corsair Vengeance LPX 3000MHz DDR4 (2 x 8GB sticks). I have no issues whatsoever. My rig runs great!!! My RAM also shows 2133MHz at default, but as soon as I clicked the red XMP button- all was good and running at 3000MHz. No probs. The Enhanced Turbo feature keeps all fours cores on my i7 6700k running at 4.2GHz as well (but I OC'ed to 4.4 right now). Awesome.... It's a great board. But it's always possible that you got a lemon. Before I gave up and RMA'ed I would:

...First I would reset CMOS. Then update the board's BIOS if you haven't already using M-Flash. Make sure you plug USB stick in to back of motherboard and not into a front panel USB slot. I'm running BIOS v1.6.

Then re-post with results.

what if bios doesnt even pop up? Trying the bios flashback+ feature doesnt seem to work.

Search

MSI Gaming M7 z170a and I7 6700k and Corsair Vengeance lpx ddr4 ram no boot, no display, no bios help urgent

Sean_I_really_need_help

Reputable

hapkiman

Sleetz

Reputable

Supahos

Expert

hapkiman

Distinguished

hapkiman

Distinguished

brosiahchill

Commendable

TRENDING THREADS

Latest posts

Moderators online

Share this page