XFX HD6850 Crossfire Problem. Second Card is not working.

s2kbk7

Reputable
Oct 14, 2015
1
0
4,510
hello everyone

I have got problem with my crossfire setup. firstly the everything is working properly except the second gpu. the problem with the second gpu is that the fan is over working (rpm sound is so high), and the crossfire is not enabled. i changed the settings or tried to change the settings the primary gpu to pci-e and it is still not enabled. I am just guessing the second graphic card may be blew up? but if it blew up or broken how the fan is still working?

any help or idea would be appriciated!
 
Solution
Hello, did you installed the latest drives for this device?
Also make sure the "bridge" is correctly connected.
If those things doesn't work, you should install Catalyst(if you dont allready have that)
There is a Performance TAB, under that there is a AMD CrossfireX TAB.
There you can enable it, when you click apply, the thing will go back to DISABLED.
DONT worry this is normal, now restart your pc, check the TAB again and it should be fine.
Otherwise its a manufacturer problem, and you might need to contact AMD then.
Hope this helped, goodluck!

William

The Darkeye

Reputable
Oct 9, 2015
190
0
4,760
Hello, did you installed the latest drives for this device?
Also make sure the "bridge" is correctly connected.
If those things doesn't work, you should install Catalyst(if you dont allready have that)
There is a Performance TAB, under that there is a AMD CrossfireX TAB.
There you can enable it, when you click apply, the thing will go back to DISABLED.
DONT worry this is normal, now restart your pc, check the TAB again and it should be fine.
Otherwise its a manufacturer problem, and you might need to contact AMD then.
Hope this helped, goodluck!

William
 
Solution