I'll try to give as much info as possible.
New to the forum and just registered. I have a Samsung R540 not sure of the actual model because it only says "R540" on the bottom. I believe it is a R540 JA03 because of the specs resembling that of the laptop.
- It is running Windows 7 Home Premium 64-Bit (so I know 8GB can be installed).
- The laptop can handle 8gb RAM but every time I place it in I get an error message. Then when I go back to the original RAM and it boots up, no problems.
Laptop: SAMSUNG R540 JA03 [Unsure]:
http://www.eclipsecomputers.com/product.aspx?code=NBS-R540JA03
RAM Used: [DUAL CHANNEL]
ADATA AD3s1333w4g9-b (2x4GB DDR3 1333MHz)
http://www.pasocomclub.co.jp/img/4997401152727.jpg
Problem:
Upgraded RAM with ADATA 2x4 8GB Kit [1333MHz]
Windows 7 Home Premium 64-Bit! - WILL NOT BOOT!!
I get this error message every time, I try to boot with the new RAM installed:
http://cdn9.howtogeek.com/wp-content/uploads/2009/12/640x315xsshot20091217020232.png.pagespeed.ic.FbPMw1QzvX.png[/
ALSO! THE BIOS PICKS UP AND SEES THAT THE RAM IS THERE [8192MB SLOT 1: 4096MB SLOT 2: 4096MB]
Things I've Already Tried:
- Update BIOS (Newest Version)
- Reinstall Windows 7 Home Premium 64-Bit
Possible solutions?:
- Underclock RAM?, I believe that the current RAM is 2x2GB DDR3 [1066MHz]
New to the forum and just registered. I have a Samsung R540 not sure of the actual model because it only says "R540" on the bottom. I believe it is a R540 JA03 because of the specs resembling that of the laptop.
- It is running Windows 7 Home Premium 64-Bit (so I know 8GB can be installed).
- The laptop can handle 8gb RAM but every time I place it in I get an error message. Then when I go back to the original RAM and it boots up, no problems.
Laptop: SAMSUNG R540 JA03 [Unsure]:
http://www.eclipsecomputers.com/product.aspx?code=NBS-R540JA03
RAM Used: [DUAL CHANNEL]
ADATA AD3s1333w4g9-b (2x4GB DDR3 1333MHz)
http://www.pasocomclub.co.jp/img/4997401152727.jpg
Problem:
Upgraded RAM with ADATA 2x4 8GB Kit [1333MHz]
Windows 7 Home Premium 64-Bit! - WILL NOT BOOT!!
I get this error message every time, I try to boot with the new RAM installed:
http://cdn9.howtogeek.com/wp-content/uploads/2009/12/640x315xsshot20091217020232.png.pagespeed.ic.FbPMw1QzvX.png[/
ALSO! THE BIOS PICKS UP AND SEES THAT THE RAM IS THERE [8192MB SLOT 1: 4096MB SLOT 2: 4096MB]
Things I've Already Tried:
- Update BIOS (Newest Version)
- Reinstall Windows 7 Home Premium 64-Bit
Possible solutions?:
- Underclock RAM?, I believe that the current RAM is 2x2GB DDR3 [1066MHz]
Facebook
Twitter
Instagram