so, im a complete computer noob. i dont know why i was messing around. i got an adata 128 ssd in the mail and installed it. physically nothing wrong. it was reading in the setup but not in the actual computer. i didn't know how to partition it or mess with bios.
i thought it could be reading wrong so i went and messed with the RAID in set up. i went from raid auto/ata to the other option.
it wouldn't boot up anymore. saying it ran into an error everytime it tries to boot. i changed it back to the auto raid/ata. still nothing.
i messed with the raid for that ata and created a new RAID as a raid1/mirror.
then i went and tried to fix that and at this point, it's in a status rebuild with the level raid1(mirror) and the HDD is under physical disks, port 1, type/status = member disk(0).
***UPDATE. deleted the riad volume. now everything is just not loading due to the change i made in setup.
the drives menu and then sata operation, i went from raid autodetect /ata to raid on. then i went back. and i haven't been able to load. still cant.
i thought it could be reading wrong so i went and messed with the RAID in set up. i went from raid auto/ata to the other option.
it wouldn't boot up anymore. saying it ran into an error everytime it tries to boot. i changed it back to the auto raid/ata. still nothing.
i messed with the raid for that ata and created a new RAID as a raid1/mirror.
then i went and tried to fix that and at this point, it's in a status rebuild with the level raid1(mirror) and the HDD is under physical disks, port 1, type/status = member disk(0).
***UPDATE. deleted the riad volume. now everything is just not loading due to the change i made in setup.
the drives menu and then sata operation, i went from raid autodetect /ata to raid on. then i went back. and i haven't been able to load. still cant.
Facebook
Twitter
Instagram