How Can I Tell If a Graphics Card is Compatible With My Motherboard

Solution
One PCI Express x16 slot (Gen 3.0)

You have the needed slot , you need to make sure the card will fit and you have enough power to run the card.


Power Supply
Internal 460W (100V-240V)


Form Factor: internal ATX

Total wattage: 460W

Nominal input voltage range:

100-127V/3A (50-60Hz)

200-240V/2A (50-60Hz)

Dimensions: 150mm x 140mm x 86mm (5.9 x 5.5 x 3.4 inches)

Dark Lord of Tech

Retired Moderator
One PCI Express x16 slot (Gen 3.0)

You have the needed slot , you need to make sure the card will fit and you have enough power to run the card.


Power Supply
Internal 460W (100V-240V)


Form Factor: internal ATX

Total wattage: 460W

Nominal input voltage range:

100-127V/3A (50-60Hz)

200-240V/2A (50-60Hz)

Dimensions: 150mm x 140mm x 86mm (5.9 x 5.5 x 3.4 inches)
 
Solution

Swingy

Reputable
Oct 17, 2015
4
0
4,510



Thanks for the responses, but part of the reason I did the thread is because I am not exactly sure if my PC will be able to power it.
 

Swingy

Reputable
Oct 17, 2015
4
0
4,510


Thanks for the response. Sorry to continue asking questions, but is there a link that can point me in the right direction with that? Thanks again.
 
Just looked on the EVGA website, it says that card uses a single 8 pin PCIe power connector and draws a maximum of 160W. Ok, I see a couple of issues, 1st, your PSU isn't going to have an 8 pin. 2nd, although 460W should be more than enough, HP don't exactly use high quality PSUs and it would be risky to keep the current PSU.
 

TRENDING THREADS