- Oct 22, 2015
- 1
- 0
- 4,510
Hey everyone, so I recently dove into building my own PC and thought I was doing a great job until I was finished. My new RIG now won't load the BIOS screen or anything on my display for that matter. The fans run, lights are flashing and my PSU and one of my graphcs cards light up and use it's fans as well. I've gone through multiple checklists (some even from this site) and I haven't found a solution. I've checked the PSU, CPU, GPU and etc. and I still can't figure it out. I have also tried a different graphics card and changed to location of my Ram as well as running in Dual and Single BIOS mode. One thing I did notice however is that my GTX 970's fans will turn on slightly and then off again ever five seconds (not sure if this is relevant). If anyone could help I would be very thankful! Here are my specs:
Intel Core i7-6700 8M Skylake Quad-Core 3.4 GHz
G.SKILL Ripjaws 4 Series 16GB (2 x 8GB) 8-Pin DDR4 SDRAM DDR4
GIGABYTE GA-Z170X-UD5
EVGA GeForce GTX 970
Thermaltake SMART Series SP-750PCBUS 750W ATX 12V
I'm very new to this so I apologize if this isn't enough information.
Intel Core i7-6700 8M Skylake Quad-Core 3.4 GHz
G.SKILL Ripjaws 4 Series 16GB (2 x 8GB) 8-Pin DDR4 SDRAM DDR4
GIGABYTE GA-Z170X-UD5
EVGA GeForce GTX 970
Thermaltake SMART Series SP-750PCBUS 750W ATX 12V
I'm very new to this so I apologize if this isn't enough information.
Facebook
Twitter
Instagram