PC failed to boot, Monitor freezes

Simon Forsstrom

Reputable
Aug 7, 2015
3
0
4,510
Hello.
So this morning when i turned on my pc it just didn't give any signal to my monitors and they remain black. After several attempts with loading screen being stuck etc i finally got into Windows i waited only a few minutes and one of my monitors froze/shifted between no signal and signal.
My mouse/keyboard/sound died one by one and everything just froze.
I checked the temperatures of everything and it seemed alright.

I'm very thankful for answers - Simon

Power Supply: Corsair CX 850 W
OS: Windows 10
Motherboard: Gigabyte GA-Z97X-GAMING 3
CPU: Intel Core i7 4790K 4,4GHz
Memory: HyperX Savage C11 2x8GB 2133mhz-
Hard Drive: WD Caviar Red 1TB 7200RPM + WD My Passport 1TB
Video Card: EVGA GeForce Gtx 780Ti SuperClocked
 
Solution
Couple things you can try:

1) Remove and reinstall RAM. I have had issues with my RAM not being properly seated and it wouldn't POST.

2) Remove the GPU and use "canned air" to blow out all the ports.

3) Clear the CMOS on your motherboard. I have recently had to do this with mine while tinkering around with OCing.

WVMountie07

Reputable
Sep 18, 2015
217
1
4,710
Couple things you can try:

1) Remove and reinstall RAM. I have had issues with my RAM not being properly seated and it wouldn't POST.

2) Remove the GPU and use "canned air" to blow out all the ports.

3) Clear the CMOS on your motherboard. I have recently had to do this with mine while tinkering around with OCing.

 
Solution