- Nov 3, 2015
- 2
- 0
- 4,510
So I just installed 16GB DDR3 1600MHz CL 9-9-9-24 dual channel RAM and set up the XMP profile in my BIOS, but according to CPU-Z it's running at CL 11. Everything else looks good, and the RAM passed the Windows Memory Diagnostic utility, but I can't figure out what is going on with the latency.
Setting used in BIOS:
http://i.imgur.com/KQslF0S.png
CPU-Z memory tab:
http://i.imgur.com/Xv6xE2k.jpg
RAM specs (SPD tab):
http://i.imgur.com/D7SArqT.jpg
My PC:
CPU: i5-4590 3.3GHz
RAM: 16GB DDR3 1600MHz
Motherboard: ASUS H81M-D Plus
Power Supply: Corsair CX600M (600 watts)
If you have any ideas I'd really appreciate the assistance. Thanks for reading.
Setting used in BIOS:
http://i.imgur.com/KQslF0S.png
CPU-Z memory tab:
http://i.imgur.com/Xv6xE2k.jpg
RAM specs (SPD tab):
http://i.imgur.com/D7SArqT.jpg
My PC:
CPU: i5-4590 3.3GHz
RAM: 16GB DDR3 1600MHz
Motherboard: ASUS H81M-D Plus
Power Supply: Corsair CX600M (600 watts)
If you have any ideas I'd really appreciate the assistance. Thanks for reading.
Facebook
Twitter
Instagram