I have been building my own computers for several years, so I am familiar with the basics. But I must admit, this is going to be my first mod without guidelines.
Therefor I seek your help.
The setup in question is an i7-4770R Gigabyte Brix, and the goal is to replace the stock fan.
I have run into a problem with the fan. It seems to be connected to the mobo with a pin-size I am not familiar with.
Pictures of the stock fan:
Pictures of the new fan:
A 120mm ultrathin Scythe
I am wondering if it is even possible to connect the Scythe to this particular mobo? They're both 12V but will I be able to modify the connector of the Scythe, to be inserted in the Brix?
Thank you in advance,
Marius
Therefor I seek your help.
The setup in question is an i7-4770R Gigabyte Brix, and the goal is to replace the stock fan.
I have run into a problem with the fan. It seems to be connected to the mobo with a pin-size I am not familiar with.
Pictures of the stock fan:
Pictures of the new fan:
A 120mm ultrathin Scythe
I am wondering if it is even possible to connect the Scythe to this particular mobo? They're both 12V but will I be able to modify the connector of the Scythe, to be inserted in the Brix?
Thank you in advance,
Marius
Facebook
Twitter
Instagram