GA-Z97X-UD3H-BK (rev. 1.0) Bios f8 issue

Toggle sidebar Toggle sidebar
M

MultimediaStudio

Honorable
Oct 19, 2014
13
0
10,510
Hi and thanks in advance for your answer

I recently updated my GA-Z97X-UD3H-BK (rev. 1.0) bios from f6 to f8, but now when activate x.m.p. profile the uncore ratio don´t drop anymore

My questions:
this issue can be a big problem on short or long time?
How can affect the performance?
 
Sort by date Sort by votes
M

MultimediaStudio

Honorable
Oct 19, 2014
13
0
10,510


KHX21C11T2K2/8X HyperX Predator DDR3 PC3-17000 (2133MHz)

that's what I did
my first boot in default settings
then set to my custom
that way i found the problem
so i set step by step to find the option that causes
 
Upvote 0 Downvote
spooky2th

spooky2th

Splendid
May 18, 2010
4,855
1
26,960
What CPU do you have. Most Intel CPU's have to be OC'd to get memory speeds higher than 1866MHz or even 1600MHz. If you have an i7-4790 or the K version, setting optimized defaults then enabling XMP, Profile1 should set up that memory kit to the advertised speeds. Need to set "optimized defaults" first. Not default settings. Then the XMP Profile1. Make sure that memory voltage (DDR Voltage) is 1.6 volts too. Save settings and exit.
 
Upvote 1 Downvote
M

MultimediaStudio

Honorable
Oct 19, 2014
13
0
10,510
Well, thanks to all, but reading and investigating, i realize that no is a big problem.
Gigabyte, they don´t think that is necessary, so remove it
they think there is no razon in a desktop save that energy

Sorry my english

Again thanks to all...!!!

 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom