What is the default IP of this switch?
- Thread starter Swagrid
- Start date
Gingerbread
Judicious
- Nov 2, 2009
- 4,752
- 0
- 33,960
faalin
Illustrious
- Feb 22, 2012
- 6,039
- 386
- 41,240
Logging in to the Web interface
You can use the following default settings to log in to the web interface through HTTP:
•
Username
—admin
•
Password
—None
•
IP address of VLAN-interface 1 on the device
—IP address of the device, depending on the status of
the network where the device resides.
{
If the device is not connected to the network, or no DHCP server exists in the subnet where the
device resides, you can get the IP address of the device on the label on the device. IP address
is 169.254.xxx.xxx. If the MAC address is 08004E000102, the IP address would be
169. 2 5 4 .1. 2.
{
If a DHCP server exists in the subnet where the device resides, the device will dynamically
obtain its IP address through the DHCP server.
You can log in to the device through the console port, and execute the
summary
command to view the
information about its IP address.
<Sysname> summary
Select menu option: Summary
IP Method: DHCP
IP address: 169.254.1.2
Subnet mask: 255.255.0.0
Default gateway: 0.0.0.0
<Omitted>
Assuming that the IP address of the device is 169.254.1.2, to log in to the Web interface of the device
from a PC:
1.
Connect the Ethernet interface of the device to a PC by using a crossover Ethernet cable. By default,
all interfaces belong to VLAN 1.
2.
Configure an IP address for the PC and make sure
that the PC and device can reach each other.
For example, assign the PC an IP address (f
or example, 169.254.1.27)
within 169.254.0.0/16
(except for the IP address of the device).
3.
Open the browser, and input the login information.
a.
Type the IP address http:// 169.254.1.2 in the address bar and press
Enter
.
Or read page 6 of your user manual
You can use the following default settings to log in to the web interface through HTTP:
•
Username
—admin
•
Password
—None
•
IP address of VLAN-interface 1 on the device
—IP address of the device, depending on the status of
the network where the device resides.
{
If the device is not connected to the network, or no DHCP server exists in the subnet where the
device resides, you can get the IP address of the device on the label on the device. IP address
is 169.254.xxx.xxx. If the MAC address is 08004E000102, the IP address would be
169. 2 5 4 .1. 2.
{
If a DHCP server exists in the subnet where the device resides, the device will dynamically
obtain its IP address through the DHCP server.
You can log in to the device through the console port, and execute the
summary
command to view the
information about its IP address.
<Sysname> summary
Select menu option: Summary
IP Method: DHCP
IP address: 169.254.1.2
Subnet mask: 255.255.0.0
Default gateway: 0.0.0.0
<Omitted>
Assuming that the IP address of the device is 169.254.1.2, to log in to the Web interface of the device
from a PC:
1.
Connect the Ethernet interface of the device to a PC by using a crossover Ethernet cable. By default,
all interfaces belong to VLAN 1.
2.
Configure an IP address for the PC and make sure
that the PC and device can reach each other.
For example, assign the PC an IP address (f
or example, 169.254.1.27)
within 169.254.0.0/16
(except for the IP address of the device).
3.
Open the browser, and input the login information.
a.
Type the IP address http:// 169.254.1.2 in the address bar and press
Enter
.
Or read page 6 of your user manual
TRENDING THREADS
-
-
Question I'm trying to update my bios on my old pc because i think it is corrupted- Started by Crystal_B
- Replies: 21
-
-
Facebook
Twitter
Instagram