My PC has become totally unstable, blue screening every half hour or so. I ran full surface scans on both hard drives, a scan of my main drive (SSD), ran memtest for a few hours with no errors, and Prime95 has been running for close to an hour in safe mode with no problems so far. All temperatures are within acceptable limits, and blue screens happen randomly even without use in normal mode, the PC will have blue screened and rebooted with a dialog box notifying me. The PSU voltages seem fine looking in the BIOS but can't check these while running (?), it has over and under volt and current protection on a surge protector plug. I'm really at a loss. I've reformatted after an upgrade to Win 10 when the problems began, back to Win 7 and no difference.
If anyone has any suggestions, please...help!
Just as I wrote this, I glanced at the PC and it has rebooted from the safe mode Prime95 test...
If anyone has any suggestions, please...help!
Just as I wrote this, I glanced at the PC and it has rebooted from the safe mode Prime95 test...
Facebook
Twitter
Instagram