I recently installed an r9 fury ASUS STRIX and at first i didn't have any problems, but after a week or so, i started getting black screen followed by "AMD display driver stopped responding and has recovered". The error started to appear more often and after it had recovered, the screen would go black and the sound would start looping, but my pc kept running. I could still talk to people on teamspeak, but the screen remained black and the game sound still in loop (the error would also happen when i was just browsing).
Today when i booted my pc, i would get "no signal" from my monitor. I tried changing from DVI to HDMI, but same thing. At one point i got to windows loading screen, but afterwards "no signal".
I have tried the following:
- Reinstalling drivers
- Older driver versions (betas too)
- Tested RAM
- Used default settings in BIOS
- Used different monitor
- Reinstalled windows
I've been monitoring my temperatures on both CPU and GPU and everything looked normal.
The card is now removed and im using the onboard GPU and everything works flawlessly.
Specs:
Intel Core i7-3770K
ASUS SABERTOOTH Z77
Kingston DDR3 HyperX 1600 MHz 16GB
Corsair AX860 PSU
Intel 520 Series 240GB
BenQ XL2411Z
Windows 7 64-bit
What to do?
Today when i booted my pc, i would get "no signal" from my monitor. I tried changing from DVI to HDMI, but same thing. At one point i got to windows loading screen, but afterwards "no signal".
I have tried the following:
- Reinstalling drivers
- Older driver versions (betas too)
- Tested RAM
- Used default settings in BIOS
- Used different monitor
- Reinstalled windows
I've been monitoring my temperatures on both CPU and GPU and everything looked normal.
The card is now removed and im using the onboard GPU and everything works flawlessly.
Specs:
Intel Core i7-3770K
ASUS SABERTOOTH Z77
Kingston DDR3 HyperX 1600 MHz 16GB
Corsair AX860 PSU
Intel 520 Series 240GB
BenQ XL2411Z
Windows 7 64-bit
What to do?
Facebook
Twitter
Instagram