[SOLVED] Computer turns on but no signal to monitor!

Toggle sidebar Toggle sidebar
Status
Not open for further replies.
P

Patrick_15

Reputable
Nov 22, 2015
15
0
4,510
Help! My computer was running perfectly fine yesterday but today I just bought a new cpu and I had put it in computer along with its heat sink. When I turn on the computer all the fans work my gpu lights up and so does the power supply but the power button is not lit. When I turn it on it also does not connect to my monitor it says NO SIGNAL. Please help I've been sitting here stumbled and frustrated for 4 hours :( any suggestions (might send it to the repair)
 
Solution
M


Did the installer try boot afterwards him/herself and did it then?

When upgrading a new cpu, it has to be a compatible cpu on the mobo vendors list, Then the bios revision on that board has to match that new cpu and if not be updated to the one recommended by vendor with...
Sort by date Sort by votes
M

Mark_1970

Reputable
Nov 14, 2015
1,391
3
5,960


Did the installer try boot afterwards him/herself and did it then?

When upgrading a new cpu, it has to be a compatible cpu on the mobo vendors list, Then the bios revision on that board has to match that new cpu and if not be updated to the one recommended by vendor with that cpu. This at times has to done before cpu changeover for that cpu to even work
 
Upvote 0 Downvote
Solution
Status
Not open for further replies.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom