GTX 560Ti SLI with a 700W psu? (cable problem)

Toggle sidebar Toggle sidebar
P

Princeps

Reputable
Nov 26, 2015
3
0
4,510
So I just got a second GTX 560 and I am planning to SLI it. I have a 700W PSU (http://bulk.fsp-europe.com/pdf/datasheets_psu/fsp700-80bpn_85.pdf) which should have enough power but it doesn't have enough 6pin connectors (it has 2X 6+2), I need 4.

I have also 3 fans and the PC is custom-built but not by me and I am not super confident with the cables. The fans run through a control switch (integrated within the case) which controls the speed of the fans and allows to turn them off.

There are a lot of molex adaptors connected to eachother for the fans.

By any magic is there a way to get power for the second GPU?

 
Sort by date Sort by votes
P

Princeps

Reputable
Nov 26, 2015
3
0
4,510
Got my cables, installed the card, connected with the SLI bridge to discover my motherboard doesn't support SLI. I have a "Asus P8P67 LE" motherboard.

Would using software like HyperSLI solve my problem? "http://www.techpowerup.com/forums/threads/hypersli-enabling-sli-on-non-sli-motherboards.153046/"

Also I'm having difficulties understanding which expansions slots I should use. Screenshot of the PDF manual: http://puu.sh/lGCcG/a19a096347.png
 
Upvote 0 Downvote
ko888

ko888

Titan
Feb 18, 2009
16,708
41
84,990


You will have to try HyperSLI for yourself. There's no guarantee that it will work.

These are the only two slots that the two graphics cards will fit into:
ASUS_P8_P67_LE.jpg
 
Upvote 1 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom