Hello!
I have been looking around a while now for some new rams and i finally decided to go with the HyperX savage 2x8GB 2400MHz.
I have been lectured somewhat in pcpartpicker and to my horror i didn't noticed i already had some errors with my build. I really don't understand if this is a big problem, but the problem seems to continue no matter what kind of ram set i put in.
Current build: http://pcpartpicker.com/p/FMGkpg
Error:
The Kingston HyperX 8GB (2 x 4GB) DDR3-1600 Memory operating voltage of 1.65V exceeds the Intel Sandy Bridge CPU recommended maximum of 1.5V+5% (1.575V). This memory module may run at a reduced clock rate to meet the 1.5V voltage recommendation, or may require running at a voltage greater than the Intel recommended maximum.
What i want: http://pcpartpicker.com/p/2VJwdC
Error:
The Kingston Savage 16GB (2 x 8GB) DDR3-2400 Memory operating voltage of 1.65V exceeds the Intel Haswell Refresh CPU recommended maximum of 1.5V+5% (1.575V). This memory module may run at a reduced clock rate to meet the 1.5V voltage recommendation, or may require running at a voltage greater than the Intel recommended maximum.
The Kingston HyperX 8GB (2 x 4GB) DDR3-1600 Memory operating voltage of 1.65V exceeds the Intel Haswell Refresh CPU recommended maximum of 1.5V+5% (1.575V). This memory module may run at a reduced clock rate to meet the 1.5V voltage recommendation, or may require running at a voltage greater than the Intel recommended maximum.
Question: What does these errors mean? I don't understand what the problem is, which ever mobo and cpu i change to it gives me some what of the same problem.
I really appreciate the help you get from this site, it's no doubt the best place!
I have been looking around a while now for some new rams and i finally decided to go with the HyperX savage 2x8GB 2400MHz.
I have been lectured somewhat in pcpartpicker and to my horror i didn't noticed i already had some errors with my build. I really don't understand if this is a big problem, but the problem seems to continue no matter what kind of ram set i put in.
Current build: http://pcpartpicker.com/p/FMGkpg
Error:
The Kingston HyperX 8GB (2 x 4GB) DDR3-1600 Memory operating voltage of 1.65V exceeds the Intel Sandy Bridge CPU recommended maximum of 1.5V+5% (1.575V). This memory module may run at a reduced clock rate to meet the 1.5V voltage recommendation, or may require running at a voltage greater than the Intel recommended maximum.
What i want: http://pcpartpicker.com/p/2VJwdC
Error:
The Kingston Savage 16GB (2 x 8GB) DDR3-2400 Memory operating voltage of 1.65V exceeds the Intel Haswell Refresh CPU recommended maximum of 1.5V+5% (1.575V). This memory module may run at a reduced clock rate to meet the 1.5V voltage recommendation, or may require running at a voltage greater than the Intel recommended maximum.
The Kingston HyperX 8GB (2 x 4GB) DDR3-1600 Memory operating voltage of 1.65V exceeds the Intel Haswell Refresh CPU recommended maximum of 1.5V+5% (1.575V). This memory module may run at a reduced clock rate to meet the 1.5V voltage recommendation, or may require running at a voltage greater than the Intel recommended maximum.
Question: What does these errors mean? I don't understand what the problem is, which ever mobo and cpu i change to it gives me some what of the same problem.
I really appreciate the help you get from this site, it's no doubt the best place!