Cable Management Help

Toggle sidebar Toggle sidebar
ItsDovah

ItsDovah

Honorable
Nov 30, 2013
27
0
10,540
https://gyazo.com/34ac23d80aca0e9badbb481cf6e93d52

-MhZpRWG.png


Can anyone give me any suggestions on cable management? This was my first build and it was in a CM Storm Stryker. I wanted to get sleeved cables but they are almost $100 a pack and I'd like to know if anyone knows any cheaper places I can get them. Also does anyone know where to get a box sort of thing that covers your cables? Thanks in advance.
 
Solution
Zerk2012
http://media.materiel.net/live/182339.jpg
Every cable from your power supply should be going through the bottom slot to the right of the power supply to the back of the case. all connections for the parts should go out the closest slot above that point right into the connector. The 8 pin CPU power cable should run up the back side of the case and plugged into the motherboard their a place for it to go through the back side of the case right by where it plugs in. ( those case fans should be plugged in from the back also then you can't see them either)
Your not using molex adapters for the power to the video cards are you ???? that's what it looks like throw them away and use the ones right from the power supply. (going to the back...
Sort by date Sort by votes
Zerk2012

Zerk2012

Titan
Ambassador
Oct 6, 2014
21,417
2,048
104,240
http://media.materiel.net/live/182339.jpg
Every cable from your power supply should be going through the bottom slot to the right of the power supply to the back of the case. all connections for the parts should go out the closest slot above that point right into the connector. The 8 pin CPU power cable should run up the back side of the case and plugged into the motherboard their a place for it to go through the back side of the case right by where it plugs in. ( those case fans should be plugged in from the back also then you can't see them either)
Your not using molex adapters for the power to the video cards are you ???? that's what it looks like throw them away and use the ones right from the power supply. (going to the back side of the case first of course)
Look at this guys. http://cdn.pcpartpicker.com/static/forever/images/userbuild/126350.4645d1112db6d6fd2fe3ce14ebc48976.994b54a6e0594faed499c2e346330197.1600.jpg
 
Upvote 0 Downvote
Solution
ItsDovah

ItsDovah

Honorable
Nov 30, 2013
27
0
10,540


Thank you, what about the cables from corsair link on my water block, the cables go everywhere
 
Upvote 0 Downvote
Zerk2012

Zerk2012

Titan
Ambassador
Oct 6, 2014
21,417
2,048
104,240
I would use a couple of small zip ties (black) and run them on the back side of one of the water tubes to a point so they will go straight into the back of the case. The part of the zip tie you need to cut off should be on the back side out of view.
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom