I am building my Sister a PC that will be mostly for animation and video editing. I have bought all the parts here;
http://uk.pcpartpicker.com/p/kF3nxr
The PSU and Ram are left over from her budget PC. She also has a HDD we will be using.
The Ram is actually 1600MHZ but that part can't be found on PC part picker.
This compatibility issue comes up
"The Corsair XMS3 4GB (2 x 2GB) DDR3-1333 Memory operating voltage of 1.6V exceeds the Intel Haswell Refresh CPU recommended maximum of 1.5V+5% (1.575V). This memory module may run at a reduced clock rate to meet the 1.5V voltage recommendation, or may require running at a voltage greater than the Intel recommended maximum."
I have built my own computer before but it had all new parts and was all compatible. What issues could this potentially cause? If it's unusable what Ram could you recommend that would go with this build and not cost too much?
Thanks for your help.
http://uk.pcpartpicker.com/p/kF3nxr
The PSU and Ram are left over from her budget PC. She also has a HDD we will be using.
The Ram is actually 1600MHZ but that part can't be found on PC part picker.
This compatibility issue comes up
"The Corsair XMS3 4GB (2 x 2GB) DDR3-1333 Memory operating voltage of 1.6V exceeds the Intel Haswell Refresh CPU recommended maximum of 1.5V+5% (1.575V). This memory module may run at a reduced clock rate to meet the 1.5V voltage recommendation, or may require running at a voltage greater than the Intel recommended maximum."
I have built my own computer before but it had all new parts and was all compatible. What issues could this potentially cause? If it's unusable what Ram could you recommend that would go with this build and not cost too much?
Thanks for your help.