Basically I was planning on updating to windows 10 with a clean installation on a brand new SSD but I've came across a problem were I completely forgot I need to download the motherboard drivers on a USB stick as I don't have the original disk. I've looked on the gigabyte motherboard page under the drivers category for my model and windows 10 has only two drivers named: "Intel Management Engine Interface" and "Intel INF installation".
Under the windows 7 64 bit (which I'm currently using) the motherboard drivers seem to have a lot more drivers including LAN drivers, USB 3.0 etc which is quite concerning. Would really appreciate the much needed help of what drivers I need to download when performing a clean installation of windows 10 64 bit (if that's even possible).
Link to the manufacter page/ motherboard drivers (The motherboard is Rev 2.0): http://www.gigabyte.com/products/product-page.aspx?pid=4015#dl
Current specs:
CPU: i7 3770k @ 3.50GHz
GPU: Sapphire 7950 3GB Overclock Edition (Upgrading to a 390x)
RAM: Vengeance 16GB DDR3 @1600Mhz
PSU: Corsair Builder Series CX 750W V2 80 Plus Bronze
MOTHERBOARD: Gigabyte GA-Z68AP-D3
HDD: 1TB Western Digital 7200rpm (Upgrading to a ssd but formatting this hdd for storage)
Under the windows 7 64 bit (which I'm currently using) the motherboard drivers seem to have a lot more drivers including LAN drivers, USB 3.0 etc which is quite concerning. Would really appreciate the much needed help of what drivers I need to download when performing a clean installation of windows 10 64 bit (if that's even possible).
Link to the manufacter page/ motherboard drivers (The motherboard is Rev 2.0): http://www.gigabyte.com/products/product-page.aspx?pid=4015#dl
Current specs:
CPU: i7 3770k @ 3.50GHz
GPU: Sapphire 7950 3GB Overclock Edition (Upgrading to a 390x)
RAM: Vengeance 16GB DDR3 @1600Mhz
PSU: Corsair Builder Series CX 750W V2 80 Plus Bronze
MOTHERBOARD: Gigabyte GA-Z68AP-D3
HDD: 1TB Western Digital 7200rpm (Upgrading to a ssd but formatting this hdd for storage)