PCIE 3.0 Card in 3.0 Slot but GPU is reporting 2.0 bus

czar1020

Distinguished
Apr 7, 2006
185
0
18,680
I installed a R9380 about a week ago and installed all the new software. Right now its reporting I have a 2.0 bus but I have a 3.0 bus and a 3.0 card. Any ideas? I have already cleared Bios,Updated everything. Below are a few more details.


CPU
Intel Core i5 2500K


Chipset
Northbridge Intel Sandy Bridge rev. 09
Southbridge Intel Z77 rev. 04
Graphic Interface PCI-Express
PCI-E Link Width x16
PCI-E Max Link Width x16
Memory Type DDR3
Memory Size 16 GBytes
Channels Dual
Memory Frequency 666.5 MHz (1:5)
CAS# latency (CL) 9.0
RAS# to CAS# delay (tRCD) 9
RAS# Precharge (tRP) 9
Cycle Time (tRAS) 24
Command Rate (CR) 1T
Host Bridge 0x0100
MCHBAR I/O Base address 0x0FED10000
MCHBAR I/O Size 19456
MCHBAR registers

Mainboard Model
MSI Z77A-G45 (MS-7752)

Graphics Card Manufacturer - Powered by AMD
Graphics Chipset - AMD Radeon (TM) R9 380 Series
Device ID - 6939
Vendor ID - 1002
SubSystem ID - 2015
SubSystem Vendor ID - 1462
Revision ID - F1
Bus Type - PCI Express 3.0
Current Bus Settings - PCI Express 2.0 x16
BIOS Version - 015.049.000.004
BIOS Part Number - MS-V31412-F3
BIOS Date - 2015/07/13 06:34
Memory Size - 4096 MB
Memory Type - GDDR5
Memory Clock - 1425 MHz
Core Clock - 980 MHz
Total Memory Bandwidth - 182 GByte/s
2D Driver File Path - /REGISTRY/MACHINE/SYSTEM/ControlSet001/Control/Class/{4d36e968-e325-11ce-bfc1-08002be10318}/0000