Asrock H97 Anniversary; no display and no BIOS

Shaquan

Reputable
Dec 3, 2015
4
0
4,510
OK, so I have built my first computer and when I turn it on, I get no display and it doesn't boot into BIOS. I'm using an i5-4590 and a R9 290 as my gpu. The fans, gpu fan, cpu fan, etc spin but I get no display. Yes I have tried taking out the RAM, and different RAM slots, and still no BIOS. I have read that you can possibly bring a dead motherboard (hopefully it's not) back to life with a flashed BIOS chip that you can buy from eBay (or wherever you can get them from). Also I have a 600w power supply if that helps.

Any help would be appreciated!
 
Solution
Hi,
I'm Davis from ASRock HQ TSD.

We provide few ways for you to verify.
1.Please refer below link to clear CMOS for try. http:// (see P.18 in user manual)
2.Please only install necessary devices(CPU, fan, one memory, power) for narrowing the problem.
3.Please install one memory to every DIMM for try.
4.Please check whether the pins bent in CPU socket.
5.Please change another CPU and memory for verify.
If the symptom still exits, please refer below link to contact local distributor or dealer for further physical checking and assistance. http://

Thanks a lot !!
ASRock TSD

ASRock_Support-2

Reputable
Mar 6, 2015
83
1
4,710
Hi,
I'm Davis from ASRock HQ TSD.

We provide few ways for you to verify.
1.Please refer below link to clear CMOS for try. http:// (see P.18 in user manual)
2.Please only install necessary devices(CPU, fan, one memory, power) for narrowing the problem.
3.Please install one memory to every DIMM for try.
4.Please check whether the pins bent in CPU socket.
5.Please change another CPU and memory for verify.
If the symptom still exits, please refer below link to contact local distributor or dealer for further physical checking and assistance. http://

Thanks a lot !!
ASRock TSD
 
Solution