Cannot See POST or Video with Integrated Graphics GIGABYTE GA-Z97X-UD7

CaptainBrad

Reputable
Dec 5, 2015
4
0
4,510
Hello,

I would like some help or suggestions, please.

I have no input when using Intel integrated graphics on board my desktop. My graphics card was crapping out in games and the fan speed was not adjusting, so I was going to attempt to RMA it and use onboard graphics in the mean time. Unfortunately, the integrated graphics will not show anything, so now I am thinking about RMA the motherboard instead as it could possibly be messing with my GPU which worked fine previously. I do remember when I first installed that it kept using the back-up BIOS until I reset it about three times.

I tried having both enabled and switching the cables when Windows loaded, but still no display with the onboard.

Tried without pcie GPU installed, nothing.

Changed BIOS to POST with onboard video, nothing.

My Specs:

Intel Core i3-4160 Haswell Dual-Core 3.6 GHz LGA 1150 54W BX80646I34160 Desktop Processor Intel HD Graphics 4400

GIGABYTE GA-Z97X-UD7 TH LGA 1150 Intel Z97 HDMI SATA 6Gb/s USB 3.0 ATX Intel Motherboard

CORSAIR Vengeance Pro 32GB (4 x 8GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model CMY16GX3M2A1600C9R (Red)

GIGABYTE GEFORCE 650 TI BOOST 2 GB

PS: EVGA 110-B2-0850-V1 80 PLUS Bronze 850 W

Thanks!

-CaptainBrad
 

CaptainBrad

Reputable
Dec 5, 2015
4
0
4,510
One DIMM boots fine on the GeForce, but no go with the onboard. I bought 2 of the kits and had both installed for 32gb. With just one DIMM installed, I cannot see anything on post and windows 7 may load but I have no picture with Intel Integrated.
 

CaptainBrad

Reputable
Dec 5, 2015
4
0
4,510
I may be better off with just using one kit. My GPU is still choppy, and integrated onboard video is out. Is it worth sending the mobo RMA back if the onboard video never has worked?