Hey guys so I Just finished my first build and Im pretty sure that I've done everything correctly but I can't get the computer to boot to the BIOS. Connected every thing and tried to boot it up but nothing comes up on the monitor and there's a solid red light (Right above JTurbo1 LED) on the motherboard. From what I can see there are no bent pins on the cpu, The RAMs were put on correctly and the CPU Heatsink is properly seated. It also makes a sort of clicking noise from the PSU and a buzz the comes from the Optical drive.
Here is a video:
http://bit.ly/1ON4J0P
Im about to unplug everything and see if it works with just the PU, motherboard, one RAM stick, PSU and GPU but I wanted to get a second opinion in case you guys knew what could be wrong with it.
Thanks
Here is the build list:
http://pcpartpicker.com/p/pnYM99
Here is a video:
http://bit.ly/1ON4J0P
Im about to unplug everything and see if it works with just the PU, motherboard, one RAM stick, PSU and GPU but I wanted to get a second opinion in case you guys knew what could be wrong with it.
Thanks
Here is the build list:
http://pcpartpicker.com/p/pnYM99