Hi, I recently changed my stock cooler to an aftermarket one (cooler master 212 hyper) due to its good reviews for being budget. The CPU is idling at roughly 60'-70', and at 90+ when I tried to put a few processes on it. Obviously I switched it off immediately afterwards. I've checked the paste and cleaned and re-applied. Still no luck. I've made sure the pressure was enough to make good contact. Still running hot enough to fry eggs. Core voltage is okay to what I can tell. Oh and before with stock it was idling mid 40s and going no higher than 60 - but due to the noise it was making (fan was going at 6000rpm at points). Ambient temp is 15 (typical England)
Ideas?
Regards.
Will
Ideas?
Regards.
Will