I have a Dell Inspiron N5010 model with A15 BIOS...
It came with Windows 7 Pro installed 32-bit. 2GB of RAM.
Later I bought a 4GB GSkills stick. After installing the RAM, the PC was working fine. Though, I could not use more than 3GB with 32 bit.
Recently Upgraded to Windows 10 Pro 32-bit. Before upgrading I removed the 4GB RAM and installed Windows 10 32-bit with the pre-installed 2GB RAM. After the upgrade, installed the 4GB RAM back. The PC was working fine.
Yesterday, I finally upgraded to 64-bit Windows Pro (Clean Install). I could only upgrade after removing the 4GB RAM else was facing not booting or continues reboot issue. Installed Windows Pro 64-bit with 2GB RAM.
Installed the 4GB RAM back into PC, but when I try to boot the PC, it either gets stucked or reboots automatically. If I remove the RAM and restart the PC with the 2GB RAM, it works fine. But, When I install 4GB RAM, the PC doesn't restart. I could not get it pass the Windows 10 logo.
If I Remove the 2GB RAM and try to boot using 4GB RAM only, it doesn't boot at all or just same problem.
This appears soon after the Windows logo appears https://drive.google.com/open?id=0B3A0NMa-4o8SSnUtS0pOUDhrYUk
If I go to BIOS > Main, 4GB RAM Installed, it shows 6GB RAM >> https://drive.google.com/open?id=0B3A0NMa-4o8STWhwblpyMDJmQ2c
Any help would be appreciated.
It came with Windows 7 Pro installed 32-bit. 2GB of RAM.
Later I bought a 4GB GSkills stick. After installing the RAM, the PC was working fine. Though, I could not use more than 3GB with 32 bit.
Recently Upgraded to Windows 10 Pro 32-bit. Before upgrading I removed the 4GB RAM and installed Windows 10 32-bit with the pre-installed 2GB RAM. After the upgrade, installed the 4GB RAM back. The PC was working fine.
Yesterday, I finally upgraded to 64-bit Windows Pro (Clean Install). I could only upgrade after removing the 4GB RAM else was facing not booting or continues reboot issue. Installed Windows Pro 64-bit with 2GB RAM.
Installed the 4GB RAM back into PC, but when I try to boot the PC, it either gets stucked or reboots automatically. If I remove the RAM and restart the PC with the 2GB RAM, it works fine. But, When I install 4GB RAM, the PC doesn't restart. I could not get it pass the Windows 10 logo.
If I Remove the 2GB RAM and try to boot using 4GB RAM only, it doesn't boot at all or just same problem.
This appears soon after the Windows logo appears https://drive.google.com/open?id=0B3A0NMa-4o8SSnUtS0pOUDhrYUk
If I go to BIOS > Main, 4GB RAM Installed, it shows 6GB RAM >> https://drive.google.com/open?id=0B3A0NMa-4o8STWhwblpyMDJmQ2c
Any help would be appreciated.