Computer Freezes when Rendering HD video in premiere pro.

Santu Lama · Dec 18, 2015

I have a good system for video editing, not tough notch but good. Whenever I render video from Premier pro my computer freezes and had to start os manually, even reset button doesn't work. My rig is X79 MSI GD45, i7 3820k, EVGA gtx 780 classified, Corsair 4X4 16GB RAM and OS is Windows 7Ultimate 64bit. This rig is over 3 years old. Can any one suggest me? Is my cpu failing?

Karsten75 · Dec 18, 2015

Was it always like this? Have you recently opened the case and used canned air to clean out dust around the heatsink and fans? That may improve things.

Keep an eye on temperatures. If that is not the cause, then it might be a power supply issue.

Santu Lama · Dec 18, 2015

Karsten75 :

Well, I usually do those cleaning but core temp is fine, I have Corsair H105 coller, and my case window is always open coz its very cold here min 5 degree and max is just 10 degree because of winter now it is 3 degree Celsius. I use precaution for cleaning dust. Now core temp is Max 18 and min 9.

Thank you for reply Karsten75.

Karsten75 · Dec 18, 2015

so if it's not heat,there are two other possibilities.

1. Power

2. Some device with driver issues causing high latency. However, this will usually not cause the PC to necessitate a hard reboot.

I highly doubt RAM could cause those issues, but that's easy to check . http://windows.microsoft.com/en-us/windows7/diagnosing-memory-problems-on-your-computer

Santu Lama · Dec 18, 2015

Karsten75 :

I forgot to mention power supply, I have Corsair RM850 Gold.
I tried the Memory Diagnosing test and it didn't show any problem, I ran AIDA 64 test too and the result was good. Computer is Stable.

Karsten75 · Dec 18, 2015

Now we're really hunting the manes in machina :??:

Check the DPC latency checker. Highly unlikely.

http://www.thesycon.de/deu/latency_check.shtml

After I typed that, I started thinking. Could your operating environment be actually below the specified operating temperature for your components? Maybe something caught a cold (terrible pun).

Santu Lama · Dec 19, 2015

Karsten75 :

I checked the DPC latency and it seems good, I m video editor and don't have any experience in Gaming but I'll try some game for test. [And yes abt the cold I check up the computer and test its cough it is fine(Just having fun)].

Karsten75 · Dec 19, 2015

Bonus points for humor.

Let's go back to the beginning. WHen you say "start manually" - what exactly do you have to do? Pull the plug out of the wall or ... ?

Santu Lama · Dec 19, 2015

Karsten75 :

Yes same as that, I cannot reset my OS by pressing reset button of my case. I have to press power button and hold for 3-5 sec to restart which is same as unplugging cable from the wall.

Santu Lama · Dec 20, 2015

Hello everyone, thanks for your replies and you guys really suggested me a lot, here I have ordered the same MSI x79 motherboard and will arrive tomorrow and will update you guys. If it didn't work out then have to change the Processor.
Again thank you and will update tomorrow.

Karsten75 · Dec 20, 2015

I would consider changing the PSU before the processor.

Try this: https://downloadcenter.intel.com/download/19792/Intel-Processor-Diagnostic-Tool-64-bit-

Search

Computer Freezes when Rendering HD video in premiere pro.

Santu Lama

Reputable

Karsten75

Judicious

Santu Lama

Reputable

Karsten75

Judicious

Santu Lama

Reputable

Karsten75

Judicious

Santu Lama

Reputable

Karsten75

Judicious

Santu Lama

Reputable

Santu Lama

Reputable

Karsten75

Judicious

TRENDING THREADS

Latest posts

Moderators online

Share this page