how to switch from Nvidia dedicated card to intel Integrated card ?

Etheviel

Reputable
Nov 21, 2015
55
0
4,630
as the title says, i have a gt 610 Nvidia card and intel hd 4600 which comes with i5 4460 processor , and as you know the Nvidia card is so poor, the intel card is about 2 times faster than it.

the Intel drivers doesn't show up in the device manager only the gt 610, the drivers cannot be installed i always get this message when i try to install them "this computer does not meet the minimum requirements for installing the software"
and the utility can't find any updates for my drivers.

more useful information

my motherboard is GA-P85-D3
my monitor has DVI-D cable which my motherboard don't support.
 
Solution
1 x HDMI port, supporting a maximum resolution of 4096 x 2160 @ 24 Hz / 2560 x 1600 @ 60 Hz
* Support for HDMI 1.4a version.
Get a hdmi to dvi converter/ adapter. Then run ddu to completely un install the drivers remove the 610 from your system then plug the adaptor into your m/b and then to your monitor. Boot and go into bios and make sure its set to onboard graphics. If it doesnt maybe reset your bios and then try. If it boots install the intel vid drivers.

galeener

Distinguished
1 x HDMI port, supporting a maximum resolution of 4096 x 2160 @ 24 Hz / 2560 x 1600 @ 60 Hz
* Support for HDMI 1.4a version.
Get a hdmi to dvi converter/ adapter. Then run ddu to completely un install the drivers remove the 610 from your system then plug the adaptor into your m/b and then to your monitor. Boot and go into bios and make sure its set to onboard graphics. If it doesnt maybe reset your bios and then try. If it boots install the intel vid drivers.
 
Solution