This build is a few years old and has operated well for sometime.
PSU failed today. Unit would not start and started looking and figured out why.
Now have by backup PSU in until I get a new one (850W)
My issue now is that it no longer detects my 2 storage HDD's
My SATA is configured as follows:
SATA1 = Samsung SSD Drive
SATA2 = WD Black 750GB HDD
SATA3 = WD Black 750GB HDD
SATA4 = ODD
BIOS 4801 (latest)
ACHI Mode
BIOS detects SATA1 & SATA4, just not SATA2 & SATA3.
Have swapped connections around, power, etc. Nothing!
Very basic setup, nothing fancy like RAID.
Keep feeling I am missing something simple.
Would appreciate any ideas.
Thanks
PSU failed today. Unit would not start and started looking and figured out why.
Now have by backup PSU in until I get a new one (850W)
My issue now is that it no longer detects my 2 storage HDD's
My SATA is configured as follows:
SATA1 = Samsung SSD Drive
SATA2 = WD Black 750GB HDD
SATA3 = WD Black 750GB HDD
SATA4 = ODD
BIOS 4801 (latest)
ACHI Mode
BIOS detects SATA1 & SATA4, just not SATA2 & SATA3.
Have swapped connections around, power, etc. Nothing!
Very basic setup, nothing fancy like RAID.
Keep feeling I am missing something simple.
Would appreciate any ideas.
Thanks
Facebook
Twitter
Instagram