CPU: i7 5820k 3.3
Motherboard: Gigabyte x99-ud3p
Ram: Corsair Vengeance 16gb 2800 (2133*)
PSU: XFX 850w Core Edition
GPU: Sapphire R9 290x Tri Edition
I'm having some issues with overclocking. If I leave all values at default in the bios, it will boot just fine. However, even if I bump the clock multiplier from 33 to 34 I get a failed to boot error message on the splash screen. I've even incremented the Vram up by .10 and re-iterated the boot sequence every single time, all the way up to 1.3.. still fails. It has never booted to windows with even a 100mhz overclock. I turned off Core Turbo and set the Base clock to 100mhz Manually. The only thing I've changed is the multiplier and the Vram to match what has worked before... I'm exhausted from changing values. I even cleared the Cmos and reset to default bios settings.
Any help would be greatly, greatly appreciated.
Motherboard: Gigabyte x99-ud3p
Ram: Corsair Vengeance 16gb 2800 (2133*)
PSU: XFX 850w Core Edition
GPU: Sapphire R9 290x Tri Edition
I'm having some issues with overclocking. If I leave all values at default in the bios, it will boot just fine. However, even if I bump the clock multiplier from 33 to 34 I get a failed to boot error message on the splash screen. I've even incremented the Vram up by .10 and re-iterated the boot sequence every single time, all the way up to 1.3.. still fails. It has never booted to windows with even a 100mhz overclock. I turned off Core Turbo and set the Base clock to 100mhz Manually. The only thing I've changed is the multiplier and the Vram to match what has worked before... I'm exhausted from changing values. I even cleared the Cmos and reset to default bios settings.
Any help would be greatly, greatly appreciated.